Lexia-3 V48 PP2000 V25 XP Evolution With Diagbox V9.91 Software For Citroen Peugeot Diagnostic Tool

Notice: If the version you receive is not V9.91, please contact us to get the newest software link to download.

1. Update By CD

2. Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

3. Version: Lexia-3 V48,PP2000 V25,Diagbox V7.8.3

4. Support Peugeot 307


Notice: Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed. If the customer requires, we can prepare ready to work PC.

 
Lexia 3 Description:

1.It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.

2. It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.

3. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

 
LEXIA-3/PP2000 Function:

Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces, and SAE J1850 bus (both PWM and VPW).

1. Read Identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...


2. Read Fault Codes

Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").

The program supports report printing or copies to clipboards.


3. Clear Fault Codes

this function clears all stored fault codes and other diagnostic information.


4. Auto-Scan (Complete Car Scan/Test)

Detects all ECUs (electronic control units) installed in the car and reads all diagnostic fault codes.


5. Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in the graph, 9 values at once, or full listing (all measured values). Logging to a file is also supported, which allows offline analysis.


6. Actuator Test

Actuator test activates particular actuator (e.g. turn on the fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)


LEXIA-3/PP2000 Package List:

1pc x Main unit with extension OBD2 cable

1pc x Long 9pin to USB cable

1pc x Short 9pin to USB cable

1pc x OBD2 cable

1pc x 16pin to Clip Cable

1pc x Instruction for Installation and Activation DVD for PP2000



Software Display:











FAQ:



Q1.Are there any new car models which new Lexia-3 software can do?

A1: Yes, the Lexia-3 Citroen/Peugeot Diagnostic PP2000 adds some new cars as follows:

   Peugeot Bipper

   Peugeout Boxer III

   Peugeout Boxer III minibus

   Citroen Nemo

   Citroen Jumper III

   Citroen Jumper III minibus

 
Q2: Does Lexia test the tire pressure?

A2: If your car has a Tire pressure control unit, Lexia-3 can test the tire pressure.



Q3: Does Lexia-3 work with Peugeot 308?

A3: Yes, it does, but which year of your Peugeot 308? Lexia-3 PP2000 works with Peugeot 308 from 1996 to 2008.



Q4: I have installed it on the windows 7 system, but it cannot work, what is the problem?

A4: It can only be installed on an XP system; you need to change another computer with an XP system.

 

Q5: is PPS compatible with Peugeot 307 HDI?

A5: PPS2000 work with Peugeot 307, but it is not compatible with Hybrid Diesel Peugeot only with the gasoline car.

 

Q6: Can Lexia-3 PP2000 (item NO. SP08-C) work with Peugeot 407 2005, after installing the NEW DPF, can I reset DPF counter? After Eolys is full, 

can I reset Eolys counter?

A6: PP2000 supports Peugeot 407 2005, but the DPF and Eolys are truck or diesel car systems, we haven’t tested them.

 

Q7: Would you please store the software lexia3 pp2000 and diagbox6.01 in one CD?

A7: No, they are not allowed to store in one CD, they have to be stored them in two different CD, otherwise the software installation will get errors.

 

Q8: During the installation of Lexia-3, I got an ERROR reading “Failure of the activation (error 20).







A8:we used to store the lexia3 pp2000 software and diagbox v6.01 software in the same one CD, now they are separately stored into two different CD

. Please download diagbox V6.01 software at this, if it does not work either, contact us we will ship you a CD.



Q9: I install diagbox software on Windows XP3, 32BIT, but it can’t communicate with the car, besides, I install PPS software on another computer 

(Win XP, 32bit, SP3), I successfully active it, but can’t communicate with the car either, what’s the problem?

A9: Try to install Lexia3 software, if lexia3 software can communicate with the car. So it suggests you didn’t install diagbox software properly, 

or your computer system is not compatible with diagbox software, we will produce a video tutorial on how to install Diagbox, please check it in the column “video”.
 

Contact Information:

Email: buyobd@gmail.com
Tel: 86 15827411186
Whatsapp: 86 15827411186
Skype: Marshall.obd2