Your position: Home / Professional Diagnostic Tool

OEM Ford VCM II VCM 2 IDS Diagnostic and Key Programming Tool Full Chip

    Please select the information you wantX
(500 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews(1)

V101 OEM VCM 2 IDS For Ford Diagnostic and Key Programming Tool Full Chip Version

VCM2 ford software installation user guide

OEM VCM II Specification

Model name:Ford VCM 2
Software Version:
 For ford software version :V101.03
 For Mazda software version :V94 
Update:By link
Car Models:Ford/Mazda
Functions:Diagnostic interface
Connection:By OBD2.
Computer requirements:XP or Few WIN7 Pro.

VCM 2 Install/User Note:

1. Never update it online.Close the internet when install software. No anti-virus software in computer.
2. Only for Ford Cars,not trucks,pls pay attention to.
3.Pls use our software that installed in CD or sent by Link to avoide vcm ii nonworking.
4. VCM II Scan tool can do diagnose, scan, airbag, key programming, ecu programming, PCM programming via OBD2 port.VCM2 can support keys programming and PCM Programming,you need to use pin code reader to get pin code from your cars first, if you do not have pin code reader in hand, you can buy Outcode/Incode Calculator For Ford From us. And some of car models need to pay for it,you must to have an account on vcm2 website,these two functions is not free.
5. Support VMM and CFR 
6. Please make sure the working voltage is 14V and stable when you use the Ford VCM 2 Scanner do programming.
7. If you want Repgrogram PCM in old cars, you better use VCM I interface. VCM2 is not good for it.
8. Attention if you work with for Mazda V94:
You need install Mazda software on another computer with XP system.
When installed the for Mazda software, the system may reminds you this problem, like VCM2 can not boot-up properly, VCM2 LED's on not functioning properly.
No worry when you encounter these problems. Because our VCM2 chip board is for IDS software V101, if you want to work with for mazda v94, need downgrade the firmware first. (About Detailed Downgrade Steps, You Can Contact Us)


Our VCM II VCM 2 Diagnostic Tool Full Chip PCB pictures:


Ford VCM II Diagnostic Tool Description

VCMII is a OBD2 diagnostic and program tool for Ford / Mazda Gasoline / Diesel Cars From 1996 to 2015,which provides full dealer diagnostic capabilities for most 16 pin cars 1996-2015, including for all new 2013 vehicles.

VCM II User Guide : How to install Ford VCM V101.03?

V101.03 Installation Steps:
1 Check your computer real time now.Change your computer time to 2016.1.1.
2 Open IDS-91.01-FULL,start to install V91 first,choose the language you want.Accept all,and press next. Install and save it in C disk,don't change the save route.The software need about 4GB space to install.
Start to install now,usually need 30mins-1hour.Update database.
3 Open the IDS logo in your desk now,put information(ignore),then it ask for your computer time is not right.(if you have change to 2016.1.1,then ignore it here)Then it tell you only have 3 days,need activated it.(Ignore it now,press next)
4 Open the CD disk folder,Install IDS-101.01-FULL now,then Install IDS-101.02,Install IDS-101.03
5 Activated the license,copy your key from DFstd-key.Then ready to install the Deep Freeze,this software will come out automatic.

Ford VCM 2 Function:

-Automatic vehicle recognition
-Read & Clear Diagnostic Trouble Codes (DTCs)
-Live Data-stream with Recording & Playback Functions for Main ECUs
-Guided Fault Finding
-New Software Re-flash for Existing ECUs
-Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
-Program New Keys
-Injector Coding
-Set, Adjust or Remove Speed Governors
-DPF Regeneration
-Brake Bleeding
-Steering Angle Resets
-All Other Dealer Functions

Ford VCM 2 VCM II IDS Features

1. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.          
2. VCM scanner is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).  
3. It will be required for part new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.               
4. Ford scanner will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).
5. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.                   
6. The CFR replaces the Vehicle Data Recorder (VDR).
7. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing
8. IDS software for FORD ONLY ,can not do MAZDA.



Part Numbers:

Part Number: 164-R9805 - VCM II Base Kit
Part Number: 164-R9806 - VCM II CFR
Part Number: 164-R9807 - VCM II Kit with CFR
Part Number: 164-R9800 - VCM II Kit with CFR & Laptop
Part Number: 164-R9801 - VCM II DLC Cable

Available Options:

-New or Refurbished Dell Latitude Laptop
-New or Refurbished Panasonic ToughBook Laptop
-Vehicle Measurement Module (VMM) (P/N: 164-R9508)


Full Chip VCMII Unit Pictures:


ford vcm 2 for sale

Ford VCM2

Ford VCM II Diagnostic Tool

VCM II Diagnostic Tool

Ford IDS VCM 2 Software Looks:


VCM2 V101 IDS Diagnostic Scanner For Ford for mazda



Contact Information:

Tel: 86 15827411186
Whatsapp: 86 15827411186

Average rating: 5.0 based on 1 reviews
Share your thoughts with other customers
Write a review
Message Us